eResearch Doc

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
**On the Dashboard page click on the + button** 

{{:iaas:pasted:20200526-113214.png}}

**Select the template for the VM.
For the Linux make sure you have the [[iaas:firstlogin|ssh public key configured on yout account]]** 

{{:iaas:pasted:20200526-113221.png}}

**Enter a name for the vm
**
{{:iaas:pasted:20200526-113228.png}}

**Select Hardware resources. If you don't know what to allocate, start with low resources (default values) you can still upgrade afterwards**

{{:iaas:pasted:20200526-113235.png}}

**Add a network interface**

{{:iaas:pasted:20200526-113243.png}}

**Select the network** 
You have the choose to use :
   * private network : in this case the vm will be accessible from the unige network or vpn but it's more secure.
   * public network : with this configuration the VM is accessible directly form internet without any security. You will need to setup the firewall and take care of security.


{{:iaas:pasted:20200526-113250.png}}

Add only one interface ! don’t press again on “+Network Interface” 

**Select the storage :**

{{:iaas:pasted:20200526-113257.png}}

**Go back to the top and click on create**

{{:iaas:pasted:20200526-113306.png}}

**Wait a couple of minutes, until the status is "running"**

{{:iaas:pasted:20200526-113313.png}}

**Now you can connect to the vm. Using the IP shown on the interface :**

{{:iaas:pasted:20200526-113322.png}}

**Then you can login with your ssh private key**

If you need information on how to use your private key. You can follow the documentation : [[iaas:useprivateKey|use private ssh key on windows]]

{{:iaas:pasted:20200526-113330.png}}